Introducing the working principle, classification and technical characteristics of welding fume dust collectors

　Introducing the working principle, classification and technical characteristics of welding fume dust collectors

　　How does the welding fume dust collector work?

　　The welding smoke is sucked into the purifier through the range hood, and part of the welding smoke or dust can be removed through the patented pre-filter. In the initial stage of the purifier, sparks can be intercepted to prevent the occurrence of fire; then, the initially purified polluted gas enters the filter cartridge Area, pollutants remain on the surface of the filter cartridge, and clean air flows into the fan through the inner wall of the filter cartridge, and then discharged into the room; you must know that pollutants on the surface of the filter cartridge will continue to deposit, so the dust cleaning system must be turned on regularly so that the contaminants on the surface of the filter cartridge can be removed into the dust collection drawer.

　　Special classification of welding fume dust collectors

　　1. According to different working principles, welding fume dust collectors can be divided into electrostatic welding fume dust collectors and mechanical welding fume dust collectors.

　　2. According to different installation methods, welding fume purifiers can be divided into horizontal welding fume purifiers and mobile welding fume purifiers.

　　3. According to the number of suction arms, welding fume purifiers can be divided into single-arm welding fume purifiers and double-arm welding fume purifiers.

　　In addition, the cleaning methods of welding fume dust collector include manual cleaning and pulse automatic cleaning.

　　Technical characteristics of welding fume dust collector

　　1. Using DC brushless motor, it has low noise, high efficiency, fast speed, long life and low power consumption.

　　2. Its vortex backward metal wind wheel design has large air volume, large suction power and fast filtration speed.

　　3. Its built-in intelligent control panel will activate the sound and light reminder system when the filter in the machine reaches saturation, making it easier for us to know the filter replacement time and saving usage costs.

　　4. Install a stepless speed-adjustable welding smoke dust collector, and the air volume can be adjusted arbitrarily. In addition, the direction and position of the smoking pipe can be changed at will.

　　5. The design of multiple filter layers can ensure that toxic and harmful substances in the smoke are filtered out and protect human health and safety; the multi-layer filter elements can be replaced individually, which can effectively extend the use time of each filter element and the service life of the filter.

　　Small details that should be paid attention to when installing welding fume dust collector

　　The invention is simple to operate. The operator only needs to master the main power switch and fan switch, and then there are some small details in the installation process of the welding fume dust collector.

　　1. Move the soldering smoke remover to the center where welding is required.

　　2. Check carefully whether the connecting parts are firmly connected.

　　3. Check the air tightness of the connection between the welding smoke collector and the pipeline to eliminate air leakage.

　　4. Connect the power and ground wire, pay attention to the direction of the motor before operation; press the start button on the main control panel to start the welding fume dust collector; guide the fan light to let the dusty gas pass through the welding fume dust collector; at this point, the welding fume dust collector starts to work normally.

　　The editor will not introduce too much. Our company has various dust collectors and purifiers. If you have any needs or customization, you can consult our manufacturer.