The following explains the advantages and structure of welding smoke dust collectors

　　The following explains the advantages and structure of welding smoke dust collectors

　　The welding smoke dust collector is used to purify the smoke and dust generated by various welding, grinding, polishing and other processes. It has low noise and flexible use. It can be widely used in many industries such as building materials, metallurgy, chemical industry, mechanical casting, food processing, etc.

　　1. Compact design, small footprint and easy to move.

　　2. The filter element is made of new nanofiber material and the surface is covered with a thin film; the smoke filtration efficiency reaches 99%.

　　3. Our company's standard high-efficiency centrifugal fan has low energy consumption, large air volume, strong wind power, stable operation, and a processing air volume of 3500m/h.

　　4. The suction arm can hover freely within the arm length range, which is convenient for smoking. It has automatic pulse cleaning, constant air pressure, and thorough cleaning.

　　Understand the overall structure of the welding fume dust collector

　　Filter device for welding fume dust collector

　　The filter unit of the welding fume dust collector consists of three parts: a pre-filter layer, a main filter layer and a chemical filter layer. The pre-filter layer can absorb larger particles in the airflow and prevent premature clogging of the main filter layer; the main filter layer is a HEPA filter element, and the high-efficiency filter material has a filtration efficiency of 0.2 micron particles of 99.99%; the chemical filter layer is generally an activated carbon layer, which can effectively absorb odors and harmful gases in the airflow, allowing standard air to be discharged into the room.

　　Pulse cleaning of welding fume dust collector

　　The welding fume dust collector uses pulse ash spray for automatic dust cleaning, that is, the filter cartridges are automatically cleaned one by one, that is, the pulse valve is opened to generate a pulse action at a time, and the intensity and frequency of the pulse ash spray are adjustable; during dust cleaning, the electromagnetic pulse valve will be automatically opened in sequence. At this time, the high-pressure air The air will completely blow away the dust filtered on the surface of the filter cartridge along the gap between the plunger and the inner arm of the filter cartridge. The dust will fall into the dust collector under the action of gravity. In addition, if the dust cleaning effect is good, dust cleaning and filtration will not affect each other, and the welding fume dust collector can always be in good working condition.

　　Exhaust system of welding fume collector

　　The welding fume dust collector uses a dedicated imported turbine and electric centrifugal fan. Its advanced impeller design has the advantages of large air volume, low power consumption, low failure rate, and long service life. A several-meter-long movable suction arm is standard, and the arm length can be made into different lengths according to user needs; in addition, the suction arm is easy to use and flexible, and can be placed in the adsorption position no matter where the operator is.

　　Safety of welding fume collector

　　The welding fume dust collector adopts triple protection measures against fire hazards and large slag particles, and the motor adopts a burn-proof overload circuit, making the welding fume dust collector have a longer service life, safer and more reliable.

　　The editor will not introduce too much. Our company has various dust collectors and purifiers. If you have any needs or customization, you can consult our manufacturer.