Activated carbon filter is also called activated carbon deodorization device and activated carbon adsorption filter; activated carbon filter is an environmentally friendly equipment device for exhaust gas filtration and odor adsorption produced by our company. Activated carbon has high adsorption efficiency, wide application, easy maintenance, and can handle multiple tasks at the same time. With the advantages of mixed exhaust gas, activated carbon filters are used for waste gas treatment and purification in electronic components production, battery (battery) production, pickling operations, laboratory exhaust, metallurgy, chemical industry, medicine, painting, food, brewing, etc. Among them, they are most widely used in spray painting waste gas treatment.
 

             
        The organic waste gas is powered by the fan, and enters the activated carbon filter tower under positive or negative pressure. Since there is unbalanced and unsaturated molecular gravity or chemical force on the solid surface of the activated carbon, when the solid surface comes into contact with the gas, it can attract the gas molecules and concentrate them and keep them on the solid surface. The pollutants are thus adsorbed. After the waste gas passes through the filter, it enters the equipment dust exhaust system, and the purified gas is discharged at high altitude to meet the standards.
 

"Technical Specifications for Industrial Organic Waste Gas Treatment Engineering by Adsorption Method" (HJ 2026-2013)
"Technical Requirements for Environmental Protection Products Catalytic Purification Devices for Industrial Organic Waste Gases" (HJ T 389-2007)
"Technical Specifications for Industrial Organic Waste Gas Treatment Engineering by Catalytic Combustion Method" (HJ 2027-2013)
"Comprehensive Emission Standards for Air Pollutants" (GB16297-1996)
"Design Code for Power Distribution of General Electrical Equipment" (GB50055-93)
"Technical Performance and Test Methods of Dust Removal Units" (GB/T 11653-2000)
"Steel surface corrosion grade and rust removal grade before painting" (GB 8923-88)
 

        Activated carbon is a kind of black powdery, granular or pellet-shaped amorphous porous carbon. The main component is carbon, and also contains small amounts of oxygen, hydrogen, sulfur, nitrogen, and chlorine. It also has a fine structure like graphite, but the grains are smaller and the layers are irregularly stacked. Has a large surface area (500~1000m^3/g). It has strong adsorption capacity and can adsorb gas, liquid or colloidal solid on its surface. The adsorption of gas and liquid can be close to the quality of activated carbon itself.

       The adsorption effect of activated carbon is selective, and non-polar substances are easier to adsorb than polar substances. In the same series of substances, substances with high boiling points are more likely to be adsorbed. The greater the pressure, the lower the temperature, the higher the concentration, and the greater the adsorption capacity; conversely, reducing pressure and increasing temperature are beneficial to the desorption of gases.

Activated carbon is often used for gas adsorption, separation and purification, solvent recovery, decolorizing agent for sugar liquid, grease, glycerin, drugs, deodorant for drinking water or refrigerators, poison filter for gas masks, and can also be used as a catalyst or metal salt catalyst.

       When the organic waste gas is powered by the fan and enters the tower under negative pressure, due to the unbalanced and unsaturated molecular gravity or chemical force on the solid surface of the activated carbon, when the solid surface comes into contact with the gas, it can attract the gas molecules and concentrate them and keep them on the solid surface. Pollutants and odors are thus adsorbed. After the waste gas passes through the activated carbon filter, the purified gas is discharged at high altitude to meet the standards.

Activated carbon filter product advantages:   ①High adsorption efficiency and wide application;

②Easy to maintain, no technical requirements;

③Can handle a variety of mixed waste gases at the same time.

Activated carbon filter classification:Can be divided into square or round.

Activated carbon filter application scope:liveCarbon filters are mainly used for deodorizing waste gases in industries such as electronic components production, battery (battery) production, pickling operations, laboratory exhaust, metallurgy, chemical industry, medicine, painting, food, brewing and furniture production. Among them, they are most widely used in spray painting waste gas treatment.

Adsorption device:It consists of exhaust gas pipeline, dry filter, activated carbon adsorption box, pneumatic and electric regulating valves, catalytic purification device, flame arrester, mixed flow heat exchange device, exhaust fan, electrical control and other parts.

Catalytic purification device:It is composed of flame arrester, mixed flow heat exchange device, exhaust fan, electrical control and other parts.

PLC touch screen control, network remote control, etc.